how to tie a tie

how to tie a tie Best ways to tie a perfect tie knot

how to tie a tie Top Best types of Necktie knots

In this article, you will learn how to tie a tie. A tie that is knotted perfectly can make your day and It may help you in a job interview or maybe in a presentation. I know many persons in my friend circle that do not know how to tie a tie. Therefore, they always need to take the help of their friends or family members to make a perfect knot. After research on popular tie knots so, I am out with these eight types of tie knots you need to learn to save yourself from embarrassment.

Every guy should need to learn this kind of regular stuff because A tie with a perfect knot will increase your personality and people will perceive you as a gentleman. Making a perfect tie knot may be a headache for some of the peoples. But do not worry about that, we have made a brief article on how to tie a tie. Follow these tips to master the art of how to tie a tie easy.

Learn how to tie a tie in simple steps:-

1. Full Windsor Knot

Full Windsor knot is a polished triangular shape tie knot and offers a good option for job interviews, presentations and social occasions. Because of its wide appearance, this knot looks best with a selection collar shirt. Although it’s going to appear complicated, tying the complete Windsor knot is accomplished without much difficulty.

how to tie a tie Full Windsor Knot

 1. To start tying the complete Windsor knot, raise the shirt collar and drape the tie around the neck, therefore the wide end is on the proper side and extends about 12 inches below the narrow end.

 2. Cross the wide part of the tie over the narrow part.

3. Pull the wide find yourself through the opening at the neck, then down.

4. Pass the wide end underneath and to the right of the narrow part with the wrong side facing out.

5. Cross the wide part over and to the left of the narrow part with the correct side facing out.

 6. Pull the wide end up through the opening at the neck.

7. When bringing it down, pass it through the loop at the front.

8. Holding the dangling parts with one hand, slide the knot carefully up toward the collar with the opposite hand until snug, then lower the collar.

2. Half Windsor Knot

The half-Windsor knot, also referred to as the only Windsor knot , maybe a way of tying a necktie which produces a neat, triangular knot. It is larger than the four-in-hand knot and Pratt knot, but smaller than the Windsor knot . As with the complete Windsor knot , begin the method by raising the shirt collar. Drape the tie around the neck therefore the wide end is on the proper and extends roughly 12 inches below the narrow end.

Half Windsor Knot

1. Cross the wide part over the narrow part.

2. Cross the wide part behind the narrow part so the wrong side is facing out.

 3. Bring the wide find yourself and over to the left.

 4. Pull it through the opening at the neck so it lays the wrong side out to the right.

5. Bring the wide end over the narrow part from right to left with the correct side facing up.

6. Bring the wide find yourself through the neck loop again.

7. When bringing it down, insert it through the loop at the front of the collar.

8. Adjust the knot by sliding it upward with one hand and holding the tails with the opposite .

 9. Lower the shirt collar to finish the design .

3. Four-in-Hand Knot

The four-in-hand knot may be a method of tying a necktie. It is also referred to as an easy knot or schoolboy knot, thanks to its simplicity and elegance. four-in-hand knot works well for wide neckties in heavy fabrics. Few steps are necessary to tie a four-in-hand knot.

Four-in-Hand Knot by learnmensfashion.com

1. Raise the shirt collar and drape the tie around the neck so the wide end is on the right side and extends roughly 12 inches below the narrow end.

2. Bring the wide part of the tie across the narrow part.

 3. Then bring the wide part under the narrow part.

4. Bring the wide side back over the highest of the narrow part.

5. Bring the wide side up through the massive loop at the neck.

6. With a loose hold on the knot, insert the wide end during a downward direction through the loop ahead .

7. Holding rock bottom narrow a part of the tie with one hand, slide the knot upward with the opposite until neat and comfortable. Lower the shirt collar to complete the look.

4. Nicky knot

Simply put, the Nicky knot maybe a Four in hand or a Victoria knot on steroids. It’s simply bigger but slightly asymmetrical unlike the Windsor or Half Windsor knot. The name springs from Nicky, a Middle Eastern tie maker. Invented by their salesman Ernesto Curami who came up with this knot

Nicky knot by how to tie a tie easy

1. Drape the necktie around your collar with the seam outward and the thick end on your left, about two inches lower than you want the finished position.

2. Cross the thick end underneath the skinny end, making an X-shape below your chin.

3. Flip the thick find yourself ahead of the loop around your collar, then tuck it down through the loop, emerging to the left of the skinny end.

4. Bring the tip of the thick end horizontally across the front of the knot. Slip a finger underneath the horizontal band you???ve just created across the front of the knot.

5. Bring the tip of the thick to find yourself and underneath the loop around your collar.

6. Tuck the tip of the thick end down through the horizontal loop you created in Step 4.

7 . Pull the thick end all the way through the horizontal loop and comfortable it down.

8. Adjust the knot as required by holding it with one hand and pulling on the narrow end of the tie with the opposite .

5. Kelvin knot

The Kelvin may be a medium sized knot that’s perfect for narrow spread and classic spread collar shirts. Because the knot is tied with 2-wrappings, it requires more of your tie’s length. It is perfect for ties made from thinner fabrics, as well as ties that are a bit too long.

Kelvin knot by learnmensfashion.com

1.rape the necktie around your collar with the seam facing outward and the thick end on your left, hanging two to three inches lower than the desired finishing position.

2. Cross the thick end under the thin end from left to right, creating an X-shape under your chin.

3. Bring the thick end back across the front of the knot from right to left. Continue wrapping it around the thin end and pass it back from left to right behind the knot.

4. Next, bring the thick end horizontally across the front of the knot from right to left again. Slip a finger underneath the horizontal band this creates.

5.Tuck the thick end upward underneath the loop around your collar.

 6. Bring the tip of the thick end down through the horizontal loop you created in Step 4 (but not the smaller one you created in Step 3).

 7. Pull the thick end all the way through the horizontal loop, snugging the knot down into place.

8. Tighten the tie by grasping the knot with one hand and pulling gently on the narrow end with the other.

6. Plattsburgh Knot

Place the tie around your neck with the underside facing outwards. Position the wide endways the proper and therefore the skinny endways the left. The wide end should sit significantly less than the thin end. Cross the wide end underneath the thin end towards the left.

Plattsburgh Knot

1. Drape the necktie around your collar with the seam exposed and therefore the thick endways your left, 4-5 inches less than the specified finishing position.

2. Cross the thick end of the tie underneath the narrow end to form an X. Hold on to that X and flip the tip of the thick end upward over the front of the loop around your collar.

3. Tuck the thick end through the loop and bring it back toward your left side.

4. Point the thick end upward.

5. Bring the thick end back up in front of the loop ??? still staying to the left of the narrow end.

6.Tuck the thick end down through the loop, emerging on your right.

7. Bring the thick end horizontally across the front of the knot from right to left. Slip a finger under the horizontal band you only created.

8.Tuck the thick end up through the loop around your collar from behind.

9. Feed the thick end down through the horizontal band and snug it down firmly.

10. Tighten by holding the knot with one hand and pulling on the narrow end with the other. Adjust the edges so it looks symmetrical.

7. Pratt Knot

The Pratt knot may be a method of tying a necktie. it’s also referred to as the Shelby knot and therefore the Pratt-Shelby. The knot was created by Jerry Pratt, an employee of the US Chamber of Commerce within the late 1950s. Because this knot is thinner than the Windsor knot , it works well when fashioned with lightweight to medium-weight ties. The Pratt knot requires just a couple of simple steps to master.

Pratt Knot

1. to start tying the Pratt knot, raise the collar of the shirt and drape the tie wrong side up with the wide end hanging on the proper side roughly 12 inches less than the narrow end.

2. Cross the wide a part of the tie under the narrow part.

3. Bring the wide find yourself and loop it down through the opening at the neck and tighten.

4. Cross the wide end to the proper with the right side up.

5. Pull it up through the neck opening.

6. Bring it down through the knot loop.

7. Slide and adjust the knot gently and lower the shirt collar to finish the method .

8. Eldredge Knot

The Eldridge may be a unorthodox, complex & eye-catching necktie knot that involves 15 separate steps. it had been invented by Jeffrey Eldredge in 2007 and achieved internet fame in 2008. As against the overwhelming majority of tie knots, the Eldredge knot is produced by using the tiny end because the active end. With its intricate design, the Eldredge knot makes a bold statement. While tying this knot involves a spread of steps, the method isn’t as complicated because it seems. While some knots are created with a good portion of the tie, this knot is fashioned entirely from the narrow portion.

Eldredge Knot by learnmensfashion.com

1. to start tying the Eldredge knot, raise the collar of the shirt and drape the tie therefore the wide end lays on the proper side slightly below the navel.

2. Pinch the thicker side of the tie near the collar to make a dimple great distance .

3. Bring the skinny part over the thick a part of the tie.

4. Bring the skinny part under the thick a part of the tie, the incorrect side up.

5. Bring the skinny part up toward the neck.

6. Bring it down through the neck loop to the proper , wrong side up.

7. Going left, take it round the front of the knot.

8. Take it up through the neck loop.

9. Bring it backtrack to the proper .

10. Take it behind the wide a part of the tie to the left, wrong side up.

11. Take it across the front to the proper and thru the loop created within the previous step.

12. Tighten the knot by pulling the narrow end to the proper .

13. Bring the top straight up and thru the neck loop to the proper of the knot.

14. Again, bring it up, over the knot to the left of the knot.

15. Keeping the knot loose, bring the short tail up to the proper and thru the loop just created.

16. Pull to tighten.

17. Tuck the top behind the neckline on the left. Lower the shirt collar for a sensible and finished look.

Social Media Share

Leave a Comment

Your email address will not be published. Required fields are marked *